The installation instructions seem to change over time, so your best bet is to review the instructions at https://www.openmodelica.org/
Below are notes about issues when building for Mac OS X and Linux.
- Terminal (also referred to as Terminal.app) is a terminal emulator included in Apple's Mac OS X operating system. It originated in Mac OS X's predecessors, NEXTSTEP and OPENSTEP, and allows the user to interact with the computer through a command line interface. On Mac OS X, Terminal is located in the /Applications/Utilities folder.
- Need to re-install Mac OSX Sierra on my mac. App store only has HIGH Sierra. How can I download the installer for Sierra, so I can make a boot-usb drive?
12/21/2015 Building OpenModelica Under Mac OS X 10.11.1 (El Capitan)
exportCFLAGS=-I/opt/local/include
exportLDFLAGS=-L/opt/local/lib
exportPATH=/opt/local/libexec/qt4/bin:${PATH}
cd OpenModelica
autoconf
./configure --disable-omshell-terminal--disable-modelica3d--without-omc--prefix=/usr/local/openmodelica --without-paradiseo--disable-omnotebook--disable-python-interface--with-omniORB=/usr/local/omniORB-4.2.0 --with-lapack='-llapack -lblas
make omc
make install
This issue has persisted ever since Mac OS X Sierra was released. 10.12.2 does not fix the issue. While not an optimal strategy, disabling Kerberos Pre-authentication for each affected user in Active Directory can mitigate the issue. Hopefully the release of 10.12.3 fixes this issue. Start building in our sandbox for free, right now. . MAC Address Displays the machine's MAC address. Current Connection Displays detailed information about the connection, such as the SSID and the wireless signal strength. Page 163 Network Settings The numbers represented by 'X' vary according to your network environment.
The following collection contains various C# programs on Fundamental Mathematical Operations, Programs on Date and Years Formats, Programs on Bitwise and Swapping Operations, Programs on Interface, Programs on Looping Operations, Programs on Random Number Generation, Programs on Numerical Operations, Programs on Access Specifiers and various other programs on Unboxing Operation and Sealed classes.
Mac: checking LAPACK/BLAS flags... configure: error: dgesv or dswap not found
While running ./configure ...
:
checking LAPACK/BLAS flags... configure: error: dgesv or dswap not found
configure: error: ./configure failed for OMCompiler
Solution: Run ./configure
with --with-lapack='-llapack -lblas'
Could not find qmake (QT4)
checking for lrelease... no
configure: error: Could not find qmake (QT4)
configure: error: ./configure failed for OMPlot
Solution:
Installing via Macport does not include buildproject.
Installing with Macports as per https://openmodelica.org/download/download-mac results in an installation that cannot build fmus:
OpenModelica 1.9.4~dev-610-g940da3e
bash-3.2$ omc VanDerPol.mos
omc VanDerPol.mos
true
'
true
'
'Warning: The initial conditions are not fully specified. Use +d=initialization for more information.
Error: Error building simulator. Build log: rm -f VanDerPol.fmutmp/sources/VanDerPol_init.xml
cp -a /opt/local/include/omc/c/* VanDerPol.fmutmp/sources/include/
cp -a /opt/local/share/omc/runtime/c/fmi/buildproject/* VanDerPol.fmutmp/sources
cp: /opt/local/share/omc/runtime/c/fmi/buildproject/*: No such file or directory
make: *** [fmu] Error 1
Warning: The initial conditions are not fully specified. Use +d=initialization for more information.
Error: Error building simulator. Build log: rm -f VanDerPol.fmutmp/sources/VanDerPol_init.xml
cp -a /opt/local/include/omc/c/* VanDerPol.fmutmp/sources/include/
cp -a /opt/local/share/omc/runtime/c/fmi/buildproject/* VanDerPol.fmutmp/sources
cp: /opt/local/share/omc/runtime/c/fmi/buildproject/*: No such file or directory
make: *** [fmu] Error 1
'
bash-3.2$
The workaround was to install and build from Github.
CMake Error at cmake/Config.cmake:11 (message): Unsupported version of OS X : 10.11.1
(cd ParadisEO-2.0.1/build &&CC='gcc'CXX='g++'CFLAGS='-I/opt/local/include'CPPFLAGS='CXXFLAGS='-g -O2' c
make ..)
-- The C compiler identification is AppleClang 7.0.2.7000181
-- The CXX compiler identification is AppleClang 7.0.2.7000181
-- Check for working C compiler: /Applications/Xcode.app/Contents/Developer/usr/bin/gcc
-- Check for working C compiler: /Applications/Xcode.app/Contents/Developer/usr/bin/gcc-- works
-- Detecting C compiler ABI info
-- Detecting C compiler ABI info - done
-- Detecting C compile features
-- Detecting C compile features - done
-- Check for working CXX compiler: /Applications/Xcode.app/Contents/Developer/usr/bin/g++
-- Check for working CXX compiler: /Applications/Xcode.app/Contents/Developer/usr/bin/g++-- works
-- Detecting CXX compiler ABI info
-- Detecting CXX compiler ABI info - done
-- Detecting CXX compile features
-- Detecting CXX compile features - done
-- Found Doxygen: /Applications/Doxygen.app/Contents/Resources/doxygen (found version '1.8.9.1')
CMake Error at cmake/Config.cmake:11(message):
Unsupported version of OS X : 10.11.1
Call Stack (most recent call first):
CMakeLists.txt:41(include)
-- Configuring incomplete, errors occurred!
See also '/Users/cxh/src/OpenModelica/OMOptim/ParadisEO-2.0.1/build/CMakeFiles/CMakeOutput.log'.
make[1]: ***[ParadisEO-2.0.1/build/Makefile] Error 1
make: ***[omoptim] Error 2
Solution: In OpenModelica/OMOptim/ParadisEO-2.0.1/cmake/Config.cmake
, change:
to:
12/20/2015 Building OpenModelica Under RHEL 6.7
MY_FORK=MyGitHubUserName ; git clone https://openmodelica.org/git-readonly/OpenModelica.git --recursive&&(cd OpenModelica &&git remote set-url --push origin git@github.com:$MY_FORK/OpenModelica.git &&git submodule foreach --recursive'git remote set-url --push origin `git config --get remote.origin.url | sed s,^.*/,git@github.com:'$MY_FORK'/,`')
exportLD_LIBRARY_PATH=/usr/local/gcc-4.9.2/lib64:/usr/local/omniORB-4.2.0/lib:${LD_LIBRARY_PATH}
exportLDFLAGS=-L/usr/local/omniORB-4.2.0/lib
exportPATH=/usr/lib64/qt4/bin:${PATH}
autoconf
./configure --disable-modelica3d--without-omc--prefix=/usr/local/openmodelica --with-lapack='-L/usr/lib64 -llapack -lblas'--with-omniORB=/usr/local/omniORB-4.2.0
make clean
make omc
See Under RHEL, make install
in OMCompiler
failed for how to install.
Below are the various error messages I ran in to when determining the above.
Git fails with Error Setting Certificate Verify Locations
Red Hat Enterprise Linux Server release 6.7(Santiago)
bash-4.1$ git--version
git version 2.2.1
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
fatal: unable to access 'https://github.com/OpenModelica/OpenModelica.git/': error setting certificate verify locations:
CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: none
bash-4.1$
The message error setting certificate verify locations
is from curl
. My workaround was:
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
remote: Counting objects: 2906, done.
remote: Compressing objects: 100%(56/56), done.
remote: Total 2906(delta 27), reused 0(delta 0), pack-reused 2850
Receiving objects: 100%(2906/2906), 464.28 KiB |508.00 KiB/s, done.
Resolving deltas: 100%(1473/1473), done.
Checking connectivity... done.
bash-4.1$
autoconf fails because common/m4/pre-commit.m4 is not found.
The OpenModelica/README.md
file says to run autoconf
:
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
remote: Counting objects: 2906, done.
remote: Compressing objects: 100%(56/56), done.
remote: Total 2906(delta 27), reused 0(delta 0), pack-reused 2850
Receiving objects: 100%(2906/2906), 464.28 KiB |207.00 KiB/s, done.
Resolving deltas: 100%(1473/1473), done.
Checking connectivity... done.
bash-4.1$ cd OpenModelica/
bash-4.1$ ls
common CONTRIBUTING.md libraries Makefile.omdev.mingw OMEdit OMOptim OMShell testsuite
configure.ac doc Makefile.in OMCompiler OMNotebook OMPlot README.md
bash-4.1$ autoconf
/usr/bin/m4:configure.ac:9: cannot open `common/m4/pre-commit.m4': No such file or directory
/usr/bin/m4:configure.ac:10: cannot open `common/m4/ombuilddir.m4': No such file or directory
/usr/bin/m4:configure.ac:11: cannot open `common/m4/omhome.m4': No such file or directory
/usr/bin/m4:configure.ac:75: cannot open `common/m4/corba.m4': No such file or directory
autom4te: /usr/bin/m4 failed with exit status: 1
bash-4.1$
This is because the OpenModelica repo is a superproject and requires further work.
The OpenModelica GitHub repo is a superproject, see https://github.com/OpenModelica/OpenModelica RHEL 6.7
The README.md
file says
# The default choice is to push to your fork on github.com (SSH). Replace MY_FORK with OpenModelica to push directly to the OpenModelica repositories (if you have access)
MY_FORK=MyGitHubUserName ; git clone https://openmodelica.org/git-readonly/OpenModelica.git --recursive&&(cd OpenModelica &&git remote set-url --push origin git@github.com:$MY_FORK/OpenModelica.git &&git submodule foreach --recursive'git remote set-url --push origin `git config --get remote.origin.url | sed s,^.*/,git@github.com:'$MY_FORK'/,`')
Configure fails with: Could not find qmake (QT4)
Under RHEL 6.7, configure fails:
configure: error: Could not find qmake (QT4)
configure: error: ./configure failed for OMPlo
Solution: Install qt4-devel
then
QMake version 2.01a
Using Qt version 4.6.2 in/usr/lib64
bash-4.1$ exportPATH=/usr/lib64/qt4/bin:${PATH}
libomniORB4.so.2: cannot open shared object file: No such file or directory
While running make
:
make[5]: Entering directory `/home/jenkins/src/OpenModelica/OMCompiler/Compiler/boot'
make -f Makefile --no-print-directory -C /home/jenkins/src/OpenModelica/OMCompiler/Compiler/Template
** AbsynDumpTpl template compilation **
/home/jenkins/src/OpenModelica/build/bin/omc AbsynDumpTpl.tpl > AbsynDumpTpl.mo.log || (cat AbsynDumpTpl.mo.log && false)
/home/jenkins/src/OpenModelica/build/bin/omc: error while loading shared libraries: libomniORB4.so.2: cannot open shared object file: No such file or directory
Solution:
make
Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference
2 errors out of 2 messages:
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:11764:3-11764:146:writable] Error: Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference.
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:32:1-11922:16:writable] Error: Failed to compile all functions in package SimCodeUtil.
make[4]: ***[build/SimCodeUtil.stamp] Error 1
make[3]: ***[generate-files-in-steps] Error 2
To replicate:
Red Hat Enterprise Linux Server release 6.7(Santiago)
bash-4.1$ /home/jenkins/src/OpenModelica/build/bin/omc --version
v1.9.4-dev.719+ga6c7cb2
bash-4.1$ pwd
/home/jenkins/src/OpenModelica/OMCompiler/Compiler/boot
bash-4.1$ /home/jenkins/src/OpenModelica/build/bin/omc -n=1 build/SimCodeUtil.stamp.mos
2 errors out of 2 messages:
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:11764:3-11764:146:writable] Error: Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference.
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:32:1-11922:16:writable] Error: Failed to compile all functions in package SimCodeUtil.
bash-4.1$
#2512 can't compile trunk because of template incompatibilities suggests removing rm build/bin/omc
and then rerunning make
, which seemed to work. #2512 suggests configuring with --without-omc
, which we are already doing.
Under RHEL, make install
in OMCompiler
failed:
# Shared data
cp-p/home/jenkins/src/OpenModelica/build/share//omc/*.*/usr/local/openmodelica/share//omc/
test!-d/home/jenkins/src/OpenModelica/build/share//omnotebook/||cp-rp/home/jenkins/src/OpenModelica/build/share//omnotebook/*/usr/local/openmodelica/share//omnotebook/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/*.xml /usr/local/openmodelica/share//omshell/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/nls/*.qm /usr/local/openmodelica/share//omshell/nls/
test!-d/home/jenkins/src/OpenModelica/build/share//omedit/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm /usr/local/openmodelica/share//omedit/nls/
cp: cannot stat`/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm': No such file or directory
make: *** [install] Error 1
My workaround was to run make -n install
and then run the remaining commands by hand:
...
# cp -p /home/jenkins/src/OpenModelica/build/share/man//man1/*.gz /usr/local/openmodelica/share/man//man1/
# Shared data
cp-p/home/jenkins/src/OpenModelica/build/share//omc/*.*/usr/local/openmodelica/share//omc/
test!-d/home/jenkins/src/OpenModelica/build/share//omnotebook/||cp-rp/home/jenkins/src/OpenModelica/build/share//omnotebook/*/usr/local/openmodelica/share//omnotebook/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/*.xml /usr/local/openmodelica/share//omshell/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/nls/*.qm /usr/local/openmodelica/share//omshell/nls/
test!-d/home/jenkins/src/OpenModelica/build/share//omedit/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm /usr/local/openmodelica/share//omedit/nls/
# Scripts
cp-rp/home/jenkins/src/OpenModelica/build/share//omc/scripts/*.*/home/jenkins/src/OpenModelica/build/share
//omc/scripts/OpenTurns /usr/local/openmodelica/share//omc/scripts
# Java
cp-p//home/jenkins/src/OpenModelica/build/share/omc/java//*/usr/local/openmodelica/share/omc/java
# Translations
cp-rp//home/jenkins/src/OpenModelica/build/share/locale//*/usr/local/openmodelica/share/locale/
bash-4.1$ cp-rp/home/jenkins/src/OpenModelica/build/share//omc/scripts/*.*/home/jenkins/src/OpenModelica/build/share//omc/scripts/OpenTurns /usr/local/openmodelica/share//omc/scripts
bash-4.1$ cp-p//home/jenkins/src/OpenModelica/build/share/omc/java//*/usr/local/openmodelica/share/omc/java
bash-4.1$ cp-rp//home/jenkins/src/OpenModelica/build/share/locale//*/usr/local/openmodelica/share/locale/
bash-4.1$
5/11/2015 Updating under Linux
Log in to terra as the jenkins user
svn update
export LD_LIBRARY_PATH=/usr/local/gcc-4.9.2/lib64:${LD_LIBRARY_PATH}
export LDFLAGS=-L/usr/local/omniORB-4.2.0/lib
autoconf
./configure --disable-modelica3d --without-omc --prefix=/usr/local/openmodelica --with-lapack='-L/usr/lib64 -llapack -lblas' --with-omniORB=/usr/local/omniORB-4.2.0
make clean
make omc
- I had to run
autoconf
because configure was failing withconfig.status: error: cannot find input file: `PythonInterface/Makefile.in'
- I removed
--without-rml
because configure saidconfigure: WARNING: unrecognized options: --without-rml
3/18/2015 Update OpenModelica from sources under Mac OS X
My pr
Read this guide to open the locked door in the Safe House in Call of Duty Black Ops Cold War (COD Cold War)! Know the gate combination, computer, rewards, & safehouse number password!
Table of Contents
Puzzle Solutions & Codes | |
---|---|
Poison Cabinet Code | Floppy Disk Code & Solution |
Weapons Locker & Key | Operation Red Circus Suspects |
Safe House Code & Computer
Opening The Locked Door
Code Combination |
---|
11-22-63 |
The code to the locked gate in the Safe House is 11-22-63. The main clue is the clipboard attached to the side of the doorway next to the lock. You can find the clues strapped onto clipboards scattered around the safe house itself.
Access After Missions
You can only open the locked door during Safe House segments. You can access and open this door after the following missions:
Clue Locations
If you wish to find the clues yourself, you can check out their locations below. Note that each of them is located at a different room in the Safe House. You can determine their sequence using the clipboard located next to the locked door.
Location | Clue |
---|---|
Blue Corridor | Click to Enlarge |
Front of Locked Door | Click to Enlarge |
Dark Room | Click to Enlarge |
Terminal Code Solution For Mac Operating System
Safe House Computer - Locked Door Rewards
Computer With Text-Based Game
Behind the locked door is a computer that you can use to play a text-based game. In order to access these games, you must do the following:
- 1. Interact with the computer
- 2. Type in 'ls'
- 3. Select any game by typing the name.
- 4. Play by typing in movements to advance
Terminal Code Solution For Mac Osx
Access Games Using Videospiel
Videospiel is an arcade cabinet that contains all the games that you have encountered during your playthrough. You can select and play each of the classic Activision titles by interacting and selecting them using the Videospiel.
SPOILER: Access To The Radio
In order to get the bad ending, you have to open the locked door to access the radio. With the radio, you can call Perseus and setup an ambush to get rid of your team in one of the final missions.
Check Out The Bad Ending Walkthrough Here!Terminal Code Solution For Mac 7
Related COD Cold War Guides
Back To Top PageSeason 1 & Battle Pass Guides
Mid Season 1 Update | Free Zombies Week |
Season 1 Battle Pass | Battlepass Summary |
Latest Patch Notes | Weapon Nerfs & Buffs |
New Season 1 Weapons
Groza | MAC-10 SMG |
Streetsweeper | Sledgehammer |
Wakizashi | - |
New Season 1 Operators
Terminal Codessolution For Mac Os
Zombies Guides
Zombies Mode Guide | |
Pack A Punch | Coffin Dance Easter Egg |
How To Exfil | Wonder Weapon D.I.E. |
Terminal Code Solution For Mac Download
Multiplayer Modes & Guides
All Multiplayer Modes | Fireteam Dirty Bomb |
Best Gun Setups & Tier List | All Maps List |
Git fails with Error Setting Certificate Verify Locations
Red Hat Enterprise Linux Server release 6.7(Santiago)
bash-4.1$ git--version
git version 2.2.1
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
fatal: unable to access 'https://github.com/OpenModelica/OpenModelica.git/': error setting certificate verify locations:
CAfile: /etc/ssl/certs/ca-certificates.crt
CApath: none
bash-4.1$
The message error setting certificate verify locations
is from curl
. My workaround was:
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
remote: Counting objects: 2906, done.
remote: Compressing objects: 100%(56/56), done.
remote: Total 2906(delta 27), reused 0(delta 0), pack-reused 2850
Receiving objects: 100%(2906/2906), 464.28 KiB |508.00 KiB/s, done.
Resolving deltas: 100%(1473/1473), done.
Checking connectivity... done.
bash-4.1$
autoconf fails because common/m4/pre-commit.m4 is not found.
The OpenModelica/README.md
file says to run autoconf
:
bash-4.1$ git clone https://github.com/OpenModelica/OpenModelica.git
Cloning into 'OpenModelica'...
remote: Counting objects: 2906, done.
remote: Compressing objects: 100%(56/56), done.
remote: Total 2906(delta 27), reused 0(delta 0), pack-reused 2850
Receiving objects: 100%(2906/2906), 464.28 KiB |207.00 KiB/s, done.
Resolving deltas: 100%(1473/1473), done.
Checking connectivity... done.
bash-4.1$ cd OpenModelica/
bash-4.1$ ls
common CONTRIBUTING.md libraries Makefile.omdev.mingw OMEdit OMOptim OMShell testsuite
configure.ac doc Makefile.in OMCompiler OMNotebook OMPlot README.md
bash-4.1$ autoconf
/usr/bin/m4:configure.ac:9: cannot open `common/m4/pre-commit.m4': No such file or directory
/usr/bin/m4:configure.ac:10: cannot open `common/m4/ombuilddir.m4': No such file or directory
/usr/bin/m4:configure.ac:11: cannot open `common/m4/omhome.m4': No such file or directory
/usr/bin/m4:configure.ac:75: cannot open `common/m4/corba.m4': No such file or directory
autom4te: /usr/bin/m4 failed with exit status: 1
bash-4.1$
This is because the OpenModelica repo is a superproject and requires further work.
The OpenModelica GitHub repo is a superproject, see https://github.com/OpenModelica/OpenModelica RHEL 6.7
The README.md
file says
# The default choice is to push to your fork on github.com (SSH). Replace MY_FORK with OpenModelica to push directly to the OpenModelica repositories (if you have access)
MY_FORK=MyGitHubUserName ; git clone https://openmodelica.org/git-readonly/OpenModelica.git --recursive&&(cd OpenModelica &&git remote set-url --push origin git@github.com:$MY_FORK/OpenModelica.git &&git submodule foreach --recursive'git remote set-url --push origin `git config --get remote.origin.url | sed s,^.*/,git@github.com:'$MY_FORK'/,`')
Configure fails with: Could not find qmake (QT4)
Under RHEL 6.7, configure fails:
configure: error: Could not find qmake (QT4)
configure: error: ./configure failed for OMPlo
Solution: Install qt4-devel
then
QMake version 2.01a
Using Qt version 4.6.2 in/usr/lib64
bash-4.1$ exportPATH=/usr/lib64/qt4/bin:${PATH}
libomniORB4.so.2: cannot open shared object file: No such file or directory
While running make
:
make[5]: Entering directory `/home/jenkins/src/OpenModelica/OMCompiler/Compiler/boot'
make -f Makefile --no-print-directory -C /home/jenkins/src/OpenModelica/OMCompiler/Compiler/Template
** AbsynDumpTpl template compilation **
/home/jenkins/src/OpenModelica/build/bin/omc AbsynDumpTpl.tpl > AbsynDumpTpl.mo.log || (cat AbsynDumpTpl.mo.log && false)
/home/jenkins/src/OpenModelica/build/bin/omc: error while loading shared libraries: libomniORB4.so.2: cannot open shared object file: No such file or directory
Solution:
make
Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference
2 errors out of 2 messages:
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:11764:3-11764:146:writable] Error: Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference.
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:32:1-11922:16:writable] Error: Failed to compile all functions in package SimCodeUtil.
make[4]: ***[build/SimCodeUtil.stamp] Error 1
make[3]: ***[generate-files-in-steps] Error 2
To replicate:
Red Hat Enterprise Linux Server release 6.7(Santiago)
bash-4.1$ /home/jenkins/src/OpenModelica/build/bin/omc --version
v1.9.4-dev.719+ga6c7cb2
bash-4.1$ pwd
/home/jenkins/src/OpenModelica/OMCompiler/Compiler/boot
bash-4.1$ /home/jenkins/src/OpenModelica/build/bin/omc -n=1 build/SimCodeUtil.stamp.mos
2 errors out of 2 messages:
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:11764:3-11764:146:writable] Error: Variable inVarInfo.numStateVars not found in scope SimCodeUtil.getDefaultValueReference.
[/home/jenkins/src/OpenModelica/OMCompiler/Compiler/SimCode/SimCodeUtil.mo:32:1-11922:16:writable] Error: Failed to compile all functions in package SimCodeUtil.
bash-4.1$
#2512 can't compile trunk because of template incompatibilities suggests removing rm build/bin/omc
and then rerunning make
, which seemed to work. #2512 suggests configuring with --without-omc
, which we are already doing.
Under RHEL, make install
in OMCompiler
failed:
# Shared data
cp-p/home/jenkins/src/OpenModelica/build/share//omc/*.*/usr/local/openmodelica/share//omc/
test!-d/home/jenkins/src/OpenModelica/build/share//omnotebook/||cp-rp/home/jenkins/src/OpenModelica/build/share//omnotebook/*/usr/local/openmodelica/share//omnotebook/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/*.xml /usr/local/openmodelica/share//omshell/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/nls/*.qm /usr/local/openmodelica/share//omshell/nls/
test!-d/home/jenkins/src/OpenModelica/build/share//omedit/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm /usr/local/openmodelica/share//omedit/nls/
cp: cannot stat`/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm': No such file or directory
make: *** [install] Error 1
My workaround was to run make -n install
and then run the remaining commands by hand:
...
# cp -p /home/jenkins/src/OpenModelica/build/share/man//man1/*.gz /usr/local/openmodelica/share/man//man1/
# Shared data
cp-p/home/jenkins/src/OpenModelica/build/share//omc/*.*/usr/local/openmodelica/share//omc/
test!-d/home/jenkins/src/OpenModelica/build/share//omnotebook/||cp-rp/home/jenkins/src/OpenModelica/build/share//omnotebook/*/usr/local/openmodelica/share//omnotebook/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/*.xml /usr/local/openmodelica/share//omshell/
test!-d/home/jenkins/src/OpenModelica/build/share//omshell/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omshell/nls/*.qm /usr/local/openmodelica/share//omshell/nls/
test!-d/home/jenkins/src/OpenModelica/build/share//omedit/nls/||cp-p/home/jenkins/src/OpenModelica/build/share//omedit/nls/*.qm /usr/local/openmodelica/share//omedit/nls/
# Scripts
cp-rp/home/jenkins/src/OpenModelica/build/share//omc/scripts/*.*/home/jenkins/src/OpenModelica/build/share
//omc/scripts/OpenTurns /usr/local/openmodelica/share//omc/scripts
# Java
cp-p//home/jenkins/src/OpenModelica/build/share/omc/java//*/usr/local/openmodelica/share/omc/java
# Translations
cp-rp//home/jenkins/src/OpenModelica/build/share/locale//*/usr/local/openmodelica/share/locale/
bash-4.1$ cp-rp/home/jenkins/src/OpenModelica/build/share//omc/scripts/*.*/home/jenkins/src/OpenModelica/build/share//omc/scripts/OpenTurns /usr/local/openmodelica/share//omc/scripts
bash-4.1$ cp-p//home/jenkins/src/OpenModelica/build/share/omc/java//*/usr/local/openmodelica/share/omc/java
bash-4.1$ cp-rp//home/jenkins/src/OpenModelica/build/share/locale//*/usr/local/openmodelica/share/locale/
bash-4.1$
5/11/2015 Updating under Linux
Log in to terra as the jenkins user
svn update
export LD_LIBRARY_PATH=/usr/local/gcc-4.9.2/lib64:${LD_LIBRARY_PATH}
export LDFLAGS=-L/usr/local/omniORB-4.2.0/lib
autoconf
./configure --disable-modelica3d --without-omc --prefix=/usr/local/openmodelica --with-lapack='-L/usr/lib64 -llapack -lblas' --with-omniORB=/usr/local/omniORB-4.2.0
make clean
make omc
- I had to run
autoconf
because configure was failing withconfig.status: error: cannot find input file: `PythonInterface/Makefile.in'
- I removed
--without-rml
because configure saidconfigure: WARNING: unrecognized options: --without-rml
3/18/2015 Update OpenModelica from sources under Mac OS X
My pr
Read this guide to open the locked door in the Safe House in Call of Duty Black Ops Cold War (COD Cold War)! Know the gate combination, computer, rewards, & safehouse number password!
Table of Contents
Puzzle Solutions & Codes | |
---|---|
Poison Cabinet Code | Floppy Disk Code & Solution |
Weapons Locker & Key | Operation Red Circus Suspects |
Safe House Code & Computer
Opening The Locked Door
Code Combination |
---|
11-22-63 |
The code to the locked gate in the Safe House is 11-22-63. The main clue is the clipboard attached to the side of the doorway next to the lock. You can find the clues strapped onto clipboards scattered around the safe house itself.
Access After Missions
You can only open the locked door during Safe House segments. You can access and open this door after the following missions:
Clue Locations
If you wish to find the clues yourself, you can check out their locations below. Note that each of them is located at a different room in the Safe House. You can determine their sequence using the clipboard located next to the locked door.
Location | Clue |
---|---|
Blue Corridor | Click to Enlarge |
Front of Locked Door | Click to Enlarge |
Dark Room | Click to Enlarge |
Terminal Code Solution For Mac Operating System
Safe House Computer - Locked Door Rewards
Computer With Text-Based Game
Behind the locked door is a computer that you can use to play a text-based game. In order to access these games, you must do the following:
- 1. Interact with the computer
- 2. Type in 'ls'
- 3. Select any game by typing the name.
- 4. Play by typing in movements to advance
Terminal Code Solution For Mac Osx
Access Games Using Videospiel
Videospiel is an arcade cabinet that contains all the games that you have encountered during your playthrough. You can select and play each of the classic Activision titles by interacting and selecting them using the Videospiel.
SPOILER: Access To The Radio
In order to get the bad ending, you have to open the locked door to access the radio. With the radio, you can call Perseus and setup an ambush to get rid of your team in one of the final missions.
Check Out The Bad Ending Walkthrough Here!Terminal Code Solution For Mac 7
Related COD Cold War Guides
Back To Top PageSeason 1 & Battle Pass Guides
Mid Season 1 Update | Free Zombies Week |
Season 1 Battle Pass | Battlepass Summary |
Latest Patch Notes | Weapon Nerfs & Buffs |
New Season 1 Weapons
Groza | MAC-10 SMG |
Streetsweeper | Sledgehammer |
Wakizashi | - |
New Season 1 Operators
Terminal Codessolution For Mac Os
Zombies Guides
Zombies Mode Guide | |
Pack A Punch | Coffin Dance Easter Egg |
How To Exfil | Wonder Weapon D.I.E. |
Terminal Code Solution For Mac Download
Multiplayer Modes & Guides
All Multiplayer Modes | Fireteam Dirty Bomb |
Best Gun Setups & Tier List | All Maps List |
Leveling Guides
Prestige Class | |
Rank Up Fast | Level Up Weapon Levels Fast |
Game Databases
Terminal Code Solution For Mac High Sierra
All Weapons List | Perk List |
All Weapon Blueprints | Lethal List |
All Tactical List | All Scorestreak List |
All Field Upgrades List | Wildcard List |
All Operator List | All Maps List |
All Character List | All Dark Ops Challenges |
All Attachments | - |
Campaign-Related Guides
Terminal Codessolution For Mac Catalina
All Campaign Missions Story | All Characters List & Voice Actor |
Codes & Passwords
Safe House Lock Code | Floppy Disk Code |
Operation Red Circus Suspects | Poison Cabinet Code |